2018-11-14
HDPE pipe/HDPE pipe fittings/HDPE butt fusion fittings/ HDPE electrofusion fittings
Basic Info
Material: HDPE
Specification: Dn20-1000 for HDPE pipe, DN20-800mm for HDPE pipe fittings (DN20-630mm for HDPE electrofusion fittings, DN63-800mm for HDPE butt fusion fittings)
Trademark: SUNPLAST
HS Code: 3917210000 for HDPE pipe, 391740000 for HDPE pipe fittings/HDPE butt fusion fittings/HDPE electrofusion fittings
SDR: SDR11, SDR13.6, SDR17, SDR21 & SDR26 for HDPE pipe, SDR11 & SDR17 for HDPE pipe fittings/HDPE butt fusion fittings/HDPE electrofusion fittings
Thickness: 2.3-59.3mm
Place of Origin: China (Mainland)
Loading port: Ningbo or Shanghai
HDPE pipe for water supply
9. Installation cost lower: Light weight, easy handling and installing, simple welding technique and exemption of being embalmed result in low construction cost.
Technical Parameter
All of HDPE pipe/HDPE pipe fittings/HDPE butt fusion fittings/ HDPE electrofusion fittings can fully comply with ISO4427 standard, with technical parameters as follows:
Number |
Test Items |
Requirements |
1 |
Surface finish check |
Smooth, no defect |
2 |
Dimensional check |
As per ISO4427 standard |
3 |
Elongation At Break |
≥350% |
4 |
Longitudinal reversion At 110℃, 1h |
≤3% (no effect on surface) |
5 |
The oxidation induction time at 200℃ |
≥20min. |
6 |
Melt flow rate/MFR at 190℃, 5KGS, 10min. |
Change of MFR by pocessing of ±20% |
7 |
Hydraulic strength at 20℃, 12.4Mpa for 100h |
No failure during test period |
8 |
Hydraulic strength at 80℃, 5.4Mpa for 165h |
No failure during test period |
Contact us
Contact Sunplast company for more details of HDPE pipe/HDPE pipe fittings/HDPE butt fusion fittings/ HDPE electrofusion fittings