HDPE Butt Fusion Fittings Manufacturers

To achieve the butt fusion, the HDPE butt fusion fittings’ outer diameter shall be exact same to the HDPE pipe. By using a HDPE pipe butt fusion machine to fusion both ends in a certain temperature & time, and then remove the heating plates, tightly bond together the both ends under fixed pressure till it is cool down.

SUNPLAST HDPE butt fusion fittings can be provided in a diameter dn63mm to dn1200mm. The diameter DN63-800mm can be injection moulded in SDR17/SDR13.6 & SDR11, while DN900-1200mm can be provided in FABRICATED TYPE only.

SUNPLAST can provide HDPE butt fusion fittings in the most common configurations of elbow 90deg, elbow 45deg, elbow 22.5deg, Tee, Reducer, Reducing tee, flange adaptors.,etc. All HDPE butt fusion fittings are made by injection moulded technology with one-time moulding, no any jointing, this allows our fittings the great reliability when bearing high pressure use.

The HDPE butt fusion fittings are made by superior quality that is approved by PE100+ association, at the same time, it can conform to ISO4427-3/EN12201-3/AS4129 standards. The below is the technical Characteristic of SUNPLAST HDPE butt fusion fittings based on ISO4427-3 standard:

Regular sizes & items of HDPE butt fusion fittings are available in stock, such as 63mm, 75mm, 90mm, 110mm, 160mm, 200mm, 250mm, 315mm.,etc.

Our regular exporting packing methods is cartons (cartons can print customer’s logo) for dia. Dn63-315mm. The HDPE butt fusion fittings larger to 315mm shall be wrapped by PP bags for each pieces.

Customer’s logo can be stamped or embossed on the HDPE butt fusion fittings.

SUNPLAST is ready to provide our best quality HDPE butt fusion fittings to all customers around the world, please contact us freely if you have any enquiry to us：

For 24 hours contact details as below:

Email: export@ sunplastpipe.com

            sunplastpipe@gmail.com

Tel: 0086-574-87226883/87467583

Mobile/whatsApp/Wechat: 0086-15968493053/18858041865